How to: Remove Front Bezel from the 5000T

Removing the front bezel from the 5000T is a simple process. 

To begin, you will need to do the following:

1. Remove the left and right side panels from the 5000T by removing the panel screws.
2. Remove the top panel by gently pulling upwards
   
   
3. Once the panels are removed you will notice these two screw on both sides as indicated below:
   
   
4. Unscrew the four screws, afterward remove the 5000T front panel filter, and gently pull on the bezel until it's removed from the case.