iCUE 4 Patch Notes
Table of Contents
- Version 4.33.138 Patch Notes
- Version 4.32.129 Patch Notes
- Version 4.31.168 Patch Notes
- Version 4.30.162 Patch Notes
- Version 4.29.203 Patch Notes
- Version 4.28.174 Patch Notes
- Version 4.27.168 Patch Notes
- Version 4.26.110 Patch Notes
- Version 4.25.155 Patch Notes
- Version 4.24.193 Patch Notes
- Version 4.23.137 Patch Notes
- Version 4.22.203 Patch Notes
- Version 4.20.169 Patch Notes
- Version 4.19.191 Patch Notes
- Version 4.18.209 Patch Notes
- Version 4.17.244 Patch Notes
- Version 4.16.187 Patch Notes
- Version 4.15.153 Patch Notes
- Version 4.14.179 Patch Notes
- Version 4.13.223 Patch Notes
- Version 4.12.214 Patch Notes
- Version 4.11.240 Patch Notes
- Version 4.10.273 Patch Notes
Version 4.33.138 Patch Notes
Software Enhancements
- Tutorials will now have an animation to indicate a misclick outside of the intended area
- Murals now supports different layout configurations for your devices – users can find this new feature above the device placement area in Murals
- Holiday themed videos have been added to the Murals video library
- Users with Intel ARK GPUs will no longer experience iCUE application errors
- iCUE macOS will no longer crash when using Facetime with any CORSAIR headset
- Watercolor Spectrum icon is now consistent in both Lighting Effects and Hardware Lighting tabs
- Resolved the Type Lighting issue with Lighting Link when used with LS100 and LT100 devices
HID Product Enhancements
- Hardware Profiles will now properly remember the profile color assigned to them
- Resolved various issues with K100 Air and Lighting Link
- The battery gauge for K70 PRO MINI Wireless will now properly show up in the system tray in wireless mode
DIY Product Enhancements
- Commander Core XT preset fan curves under Custom Curve -> Custom have been corrected to match the actual values for each of the Cooling Presets
Version 4.32.129 Patch Notes
Software Enhancements
- iCUE Murals is now supported in iCUE for macOS
- Optimized the layout for all Nanoleaf devices in iCUE Murals
- Devices stacked on top of one another in iCUE Murals will now have some transparency for better visibility
- Resolved an issue with Macros and Text Actions when used as second assignments
- Resolved text overlapping issues with certain languages
- Battery Status widgets can now be properly renamed
- Resolved the Type Lighting issue with Lighting Link when used with LS100 and LT100 devices
HID Product Enhancements
- Dark Core RGB / SE will no longer crash the software after a firmware update
DIY Product Enhancements
- Made further improvements for the DDR5 detection on AMD platforms that uses Intel thunderbolt drivers – the delay for device detection has been drastically shortened compared to the previous version of ICUE
- Resolved a rare issue with Elite LCD Image Image/Gif customization that sometimes causes iCUE to crash
Version 4.31.168 Patch Notes
Software Enhancements
- NVIDIA GeForce RTX 4000 series cards have been added for NVIDIA Broadcast support
- Resolved an issue with Murals not applying lighting across all RGB fans
HID Product Enhancements
- Customizing the EQ Switch has been improved by removing the pop-up window that appeared separately from all of the other controls
- Resolved an issue with the inability to scroll in certain panels for iCUE NEXUS
DIY Product Enhancements
- We are aware of an issue with certain AMD platforms causing DDR5 memory detection issues, especially after a Thunderbolt driver update. There is a short-term implementation in this version of iCUE that will resolve the problem but introduces a slight delay of 30 seconds for the memory to appear in iCUE. A more efficient solution will be implemented in the next update and we apologize for the inconvenience.
- Improved the editing of the timer for Elite LCD’s gallery feature
- Commander Core XT preset fan curves have been for less overall noise
- PSU sensors on the Dashboard for HXi will no longer appear in random order
- Resolved a hardware lighting issue for all Vengeance RGB memory
Version 4.30.162 Patch Notes
Software Enhancements
- Resolved an issue with iCUE crashing on startup with Nanoleaf Light Panels
- We are happy to share with everyone our latest software feature, iCUE Murals. iCUE Murals will allow users to create lighting effects in an entirely new way such as using videos, images, and screen mirroring for an all-new experience of lighting synchronization across their iCUE products.
- Murals How-To: https://youtu.be/I77193jsd-w
HID Product Enhancements
- EQ Visualizer issues on Windows 11 have been resolved
- Slipstream wireless polling rate is now shown in Device Settings
- Resolved an issue with Ironclaw Wireless disconnecting from iCUE after rapidly changing its polling rate
DIY Product Enhancements
- ELITE LCD now supports Custom Screen Lists – a gallery mode that allows the display to cycle through different screen types
- LS100 Hardware Lighting playback has been corrected for Rainbow Wave and Spiral Rainbow effects
- Resolved an issue with lighting effects on Windows 11 N for all RGB supported DRAM
Version 4.29.203 Patch Notes
Software enhancements
- Added Terra Invicta, Grid Force, Overloop, Thymesia, and Sweet Transit gaming profiles for iCUE game integration support.
- iCUE no longer crashes after the system, if Armoury Crate is installed, wakes from sleep.
- Forcing firmware updates in Settings no longer causes devices to disconnect from iCUE.
- CPUID SDK has been updated to the latest version.
- Updated NVIDIA Broadcast SDK to support the latest generation of GeForce GPUs.
- Resolved a detection issue with ASUS GPUs with Aura support.
- Fixed issues caused by using the search function for the Lighting Library.
- Color picker values are no longer off by 1 R/G/B value.
HID product enhancements
- Resolved an issue with the HS80 USB Wireless Receiver firmware update.
- Fixed an issue where the M65 PRO RGB's front LED would stay blue regardless of color configured in iCUE.
- Resolved an issue with the SCIMITAR RGB Profile Switch and DPI Toggle Assignments.
- Fixed an issue where having the K100 tutorial open would block users from assigning a macro.
- Mic Boost now works on iCUE macOS for CORSAIR headsets that support the feature.
- VIRTUOSO XT with NVIDIA Broadcast technology no longer causes issues with Discord.
- K55 RGB PRO XT's Visor Lighting Effect will now play appropriately across all keys.
- Resolved an issue where the M65 ULTRA WIRELESS's DPI settings were affected by previously deleted values.
- Step 3 of the K70 RGB PRO MINI's tutorial no longer causes issues.
DIY product enhancements
- DRAM lighting configuration no longer requires users to enable SPD Write Access in the BIOS for full iCUE functionality.
- Resolved various search issues with Cooling and Alerts.
Known issues
- Users of any version of Windows N will encounter an issue with our audio driver that causes iCUE to have a white screen on startup. This is due to several dependencies in iCUE on certain libraries provided by Windows media. To temporarily resolve this while we work to fix the issue, please install this media feature packlist from Microsoft.
- We are aware of issues with Nanoleaf "Light Panels" customization in iCUE as of version 4.29.203. We are working with Nanoleaf to resolve this issue and fix it in a future update.
Version 4.28.174 Patch Notes
Software enhancements
- Resolved a display issue where Hardware Macro Delay Values exceeded 4095ms.
- Fixed an issue where the tutorial screen would persist when creating new action assignments or lighting effects.
- Resolved an issue where certain keyboard events would be stuck with On Press when a macro is activated.
HID product enhancements
- The Page Up and Page Down keys on the K70 MINI Wireless are no longer swapped when iCUE is running.
- The K57 RGB Wireless indicators now properly work while iCUE is running.
- The K100 Dial colors are no longer incorrectly shown when all control wheel options are disabled.
- Fixed a rare issue with the K70 MINI Wireless where having multiple profiles saved to the onboard memory caused the keyboard to lose data.
- Resolved an issue with fan speed control when a NEXUS is connected with both a Capellix cooler and a COMMANDE PRO controller.
DIY product enhancements
- Fixed an issue where the Voyager A1600 would lose its touchbar screen presets when restarting iCUE.
- Resolved an isse with the Voyager A1600's brightness controls for the touchbar.
Known issues
- Users on any version of Windows N will encounter an issue with our audio driver that results in a white screen when starting up iCUE. This is due to several dependencies in iCUE on certain libraries provided by Windows media. To temporarily fix this issue, install the media feature packlist from Microsoft by following this link: https://support.microsoft.com/en-us/topic/media-feature-pack-list-for-windows-n-editions-c1c6fffa-d052-8338-7a79-a4bb980a700a
- Users may experience iCUE crashing when waking their system up from sleep.
- Users of Armoury Crate may experience issues with CORSAIR RGB DRAM detection. We are currently investigating this issue, but you can try the following workarounds:
- Restart the Lighting Service in Windows Services.
- Uninstall any previous version of iCUE and do a clean installation of iCUE version 4.28.174.
Version 4.27.168 Patch Notes
Software enhancements
- CORSAIR virtual playback driver is now WHQL certified.
- Resolved an issue where the Home Page would show a white screen on Windows N platforms.
- Fixed an issue where some info buttons required two clicks to open.
- Profile color change no longer stays black if it was previously selected.
HID product enhancements
- Resolved an issue where lighting customization was prevented if the Nexus was unplugged.
- M65 Ultra Gestures can now be assigned to Key Assignments by a physical tilt of the mouse.
DIY product enhancements
- The Spiral Rainbow lighting effect on Vengeance RGB DDR5 now plays its lighting properly.
- Fixed an issue with monitor selection for video playback on the LS100.
- Xeneon series monitors now properly show up in iCUE after a power cycle.
Version 4.26.110 Patch Notes
Software enhancements
- Resolved an issue where battery widgets did not appear properly in iCUE.
- Fixed an issue where keyboard keys were not highlighted when an action was dragged and dropped.
- Resolved a rare issue where iCUE would crash when changing profiles.
HID product enhancements
- Fixed an issue with the HS80 USB's firmware update.
- Resolved an issue where the M65 PRO RGB's front LED would stay blue regardless of the color configuration in iCUE.
- Fixed an issue with the SCIMITAR RGB Profile Switch and DPI Toggle Assignments.
- The K100 tutorial being open will no longer block users from assigning a macro.
- Mic Boost now works on iCUE macOS for CORSAIR headsets that support the feature.
DIY product enhancements
- ELITE LCD's Set LCD Frame Rate slider no longer breaks when using iCUE with different languages.
- Resolved a rare issue where the ELITE LCD would improperly download the wrong firmware.
Version 4.25.155 Patch Notes
Software enhancements
- iCUE now supports NVIDIA Broadcast technology for users with CORSAIR audio products and GeForce 2000 / 3000 series GPUs. You can download the plugin by going to the NVIDIA tab of your audio product and using the wizard.
- Banners for the Home Page are now properly scaled and aligned with other device tiles.
- Additional iCUE integrations have been added for the following games:
- Midnight Ghost Hunt
- Dwerve
- Old World
- Tutorials for the dashboard no longer show up outside of the window.
- Fixed an issue where iCUE would crash when rapidly switching between profiles.
DIY product enhancements
- ELITE LCD now supports screen rotation for screens and custom images.
- Resolved an issue where the ELITE LCD was not being properly detected in iCUE.
Version 4.24.193 Patch Notes
Software enhancements
- The following legacy products are now supported:
- K66 Mechanical Gaming Keyboard
- Philips Hue capabilities have been improved with the updates to the latest API. Your iCUE lighting effects' playback on Hue devices will be more fluid and dynamic.
- NOTE: Due to the API changes, you will only be able to configure devices grouped together as an "Entertainment Area" in your Hue mobile app.
- Improved the color picker's design for lighting effects by showing the palette together with the color wheel.
- Updated the software to the latest CPUID SDK.
HID product enhancements
- Fixed an issue with the K65 Mini where FN combinations with mice movement caused the software to crash.
- Hardware Playback devices that support multiple onboard profiles now properly allow profile switching to be configured as a button assignment.
- Resolved an issue with the Ironclaw wireless mouse's sleep mode timer flashing the old value before showing the correct configuration.
- Fixed an issue with the NEXUS not properly showing the correct assignments if more than 3 assignments are created.
DIY product enhancements
- Resolved an issue where the Dashboard was missing certain HXi PSU sensors.
- Fixed a graphical issue with the sixth fan tile when using the wizard with Commander Core.
- Resolved an issue where configuring the Elite LCD's hardware screen caused the default sensor to change.
Version 4.23.137 Patch Notes
Software enhancements
- The following legacy products are now supported in iCUE:
- KATAR RGB
- SCIMITAR RGB
- The Mic Boost option has been added for all iCUE-supported headsets; you can read how to enable mic boost here
- Updated the audio driver; this will require a system restart after iCUE finishes the installation process
- Added notifications for successful imports and exports of profiles
- Fixed the issue where the Stream Deck plugin does not work properly in iCUE; make sure iCUE is updated, then uninstall and reinstall the Stream Deck plugin
HID product enhancements
- K65 MINI macros that are configured for trigger on release will now work properly for key combinations that use the FN and FN2 keys
- Quick Lighting Zones now have a 255 character limit
- For devices in multipoint mode (2:1 or 3:1), a 10 millisecond delay between character inputs for Text actions has been added to resolve missing characters or characters registering inaccurately when the actions is triggered
- Resolved an issue where the SABRE PRO and SABRE PRO RGB were not reporting the last DPI stage to iCUE properly
DIY product enhancements
- Variable speed for pumps is now available as a pump speed option for Hydro series ELITE coolers
- Fixed a graphical issue with the sixth fan tile when using the wizard with Commander CORE.
Version 4.22.203 Patch Notes
Software enhancements
- Added a Privacy tab to Settings.
- Resolved an issue where enabling Philips Hue would crash iCUE.
- Fixed the LT100 tower names in Quick Lighting Zone.
- The control wheel lighting for the K100 is no longer affected by polling rate changes.
- Resolved text overflow issues with certain translations.
- Fixed some issues with customizing custom scenes.
- Added support for NVIDIA 3080 Ti Founders Edition in iCUE.
- Added support for the following legacy devices in iCUE 4:
- SABRE RGB
- SABRE RGB Optical
- SABRE RGB Laser
- VOID USB
- VOID Surround
- VOID Wireless
HID product enhancements
- Resolved an issue where NEXUS Actions assigned with a sound file caused a crash when triggered.
- Fixed an issue with the Brightness bar on the M65 RGB ELITE.
- Resolved an issue where users could create lighting effect layers beyond what Hardware Lighting can support per device.
- Fixed the Quick Lighting Zone for RGB DRAM so users can properly select each module.
- "Show Tutorial Tooltips" now only shows for the Lighting Node PRO when LC100 is selected as a device.
- Improved the image scaling when customizing NEXUS buttons.
DIY product enhancements
- Resolved some Chinese (Traditional and Simplified) translation errors for PSUs.
- Fixed an issue with the Infinity and Color Wave Lighting Effects playback on 8-LED fans.
- Resolved an issue with the Visor Lighting Effect and Lighting Link playback on 8-LED fans.
- Positioning of custom images and GIFs on Elite LCD will properly save when switching between images.
Known issues
- This update has caused issues with the Stream Deck plugin, making the plugin unable to work. This will be resolved in the next update.
- There is a rare issue where a mouse will be stuck in one direction when using the respective FN key shortcuts (FN + W/A/S/D) for the K65 RGB MINI.
- iCUE may crash when copying hardware profiles on hardware playback-supported keyboards. This will be fixed in the next update.
- When using autodetect, the Commander CORE may detect the wrong number of fans. This will be fixed in the next update.
Version 4.20.169 Patch Notes
Software enhancements
- ASUS Integration now has a lighting effect assigned by default.
- Resolved an issue where the color wheel would show the wrong color after an edit.
- Fixed an issue where Lighting Link was not working properly on Windows 11.
- Resolved an issue where Lighting Link > Temperature has an empty dropdown menu for sensor selection.
HID product enhancements
- KATAR PRO WIRELESS now supports 2000hz polling rate; please note you need to update the firmware to see this option under Device Settings.
- Polling Rate and Lift Height will now show as "Unavailable" if the device is not found or powered off.
- Fixed an issue where assigning Volume Up to a volume wheel resulted in Volume Down being assigned instead.
- Changing the brightness on a K100 now properly affects the LED lighting of the control wheel.
- Nexus background image editing will now scale the image properly.
- You can now properly remove the background image for a button on the Nexus.
- Resolved an issue with selecting a font through the dropdown list on the Nexus.
- The M65 ULTRA now properly shows the default lift height as Low.
- Hardware Lighting will now be properly saved to the device for the Harpoon RGB and Harpoon PRO RGB.
DIY product enhancements
- The XC5 PRO and XC8 PRO have been added to Lighting Setup for iCUE controllers.
- The XD7 fan curve has been updated.
- You can now recall the Screen Settings window back after closing it.
- Alerts > Trigger all RGB LEDs now lights all devices in iCUE.
- The Cooling Sensor value no longer overlaps when One Day is selected as the interval.
- Cooling tab units now properly switch to Fahrenheit if toggled.
- Fixed an issue where holding down the left click on the iCUE title bar causes the Elite LCD screen animation to stop playing.
- Lighting Effect - Infinity now properly plays on 8-LED series fans.
Version 4.19.191 Patch Notes
Software enhancements
- ASUS integration now has a lighting effect assigned by default.
- Duplicate devices on the home screen no longer have numbers in their names.
- Improved graph scaling when adjusting window size.
- Added more tooltips on the home screen.
- Hover on the search bar now displays the correct text.
- Resolved an issue with Action - Launch Application improperly defaulting to the first app.
- Fixed an issue with the opacity slider for Scenes.
- Resolved an issue where Key Assignments would switch between two different keys.
- Macro Action - Action Repeat no longer requires you to input a higher value first.
HID Product enhancements
- On-the-fly DPI for SABRE PRO WIRELESS mice now saves properly, if adjusted, before launching iCUE.
- Improved the performance of the K65 MINI RGB mouse's speed through the FN key combination.
- Fixed an issue where the K55 RGB improperly showed duplicate tabs when changing the layout.
- Resolved an issue with the VIRTUOSO XT lighting effects on MacOS M1 platforms.
- Fixed minor issues related to the NEXUS Macro Assignments.
- G-Key Remap for the NEXUS no longer defaults to the A key.
DIY product enhancements
- DRAM lighting playback no longer stops playing dynamically when configuring lighting effects.
- LT100 tower numbering now properly starts with Tower 1 instead of Tower 2.
- Resolved some text spacing issues with the LT100's Setup Wizard.
- Fixed a scrolling text issue with the ELITE LCD's Fade Fill effect.
- Updated ELITE LCD image to show Liquid Temp instead of CPU Temp for the hardware screen lighting device image.
Version 4.18.209 Patch Notes
Software enhancements
- Fixed an issue so that checking the Delete all saved settings checkbox will now properly delete all files during uninstallation.
- Updated CPUID SDK for the latest generation of Intel CPUs.
- Made visual improvements to all tooltip descriptions.
- Devices going through a forced update will no longer disappear from iCUE.
- Device image scrolling is no longer obstructed by device images.
- Resolved an issue where messages would overlap and pop-up windows would disappear.
- Fixed an issue where keyboards and mice were disconnecting if audio was playing during the installation of iCUE.
HID product enhancements
- Resolved an issue where selecting keyboard layouts resulted in the wrong device image displayed.
- Fixed an issue with the tilt panel for gestures that occurs when you close the Device Settings tab.
- Sabre PRO series mice no longer have X/Y DPI unlinked by default.
- Resolved an issue where the SCIMITAR RGB ELITE's front zone lighting was not playing the correct lighting effect.
- The K100 Control Wheel's macOS toggle for track jogging and zoom now saves properly when toggled.
DIY product enhancements
- Commander Core XT now supports the H55/100/150 RGB's analog pump cap lighting.
- Commander Core XT no longer defaults to the setup tab after device selection.
- Selecting the number of 8-LED Fans is no longer segregated by device type.
- Fixed an issue where the opacity for Vengeance LED was not working properly when configuring lighting effects that use it.
- Resolved an issue where Elite LCD's label colors were being affected by certain sensors.
- Elite LCD now displays a notification to confirm the deletion of images and GIF files that are assigned to different profiles.
- Elite LCD now supports 3 new patterns: Dual Bar, Turbo, and Clock.
- Fixed an issue where LS100 device images were not scaling properly during window resizing.
- DDR5 now properly shows frequencies and timings on the Dashboard.
Version 4.17.244 Patch Notes
Software enhancements
- iCUE now remembers the toggle state of each individual export and import setting.
- Resolved an issue where the battery status on the dashboard would appear blank or display incorrect information.
- Added additional Home Screen tooltips that can be seen by hovering your mouse over them.
HID product enhancements
- Fixed an issue where the HARPOON RGB PRO's device image was not properly showing the lighting zone for the DPI indicator.
- You can now scale your images for iCUE Nexus buttons.
- Resolved an issue where the mouse pointer speed was much higher than what was configured in Windows on initial iCUE startup.
- Hardware profile warning messages no longer appear from toggling advanced mode while editing a macro but not making any changes.
- Clicking on Swap Menu Key Functions now properly updates the changes in the Modifier box.
- The macro edit menu no longer persists onscreen once it is minimized.
- Fixed an issue where LT100 towers were inaccurately labeled on initial detection.
- Toggling Lighting Link from iCUE Nexus now correctly includes devices supported by the ASUS plugin.
DIY enhancements
- Added Change Input Source to iCUE Nexus and the iCUE Plugin for Elgato Stream Deck for extended Xeneon functionality.
- Changed the ELITE CAPELLIX LCD frame rate adjuster to a slider with a range of 1 to 30 FPS.
- Resolved a graphical issue where hovering your mouse over the sensor tiles had inconsistent highlighting.
- PSU widgets no longer go off the screen when iCUE is at a lower resolution.
- Updated the ELITE CAPELLIX LCD image on the Home Screen.
- Min and max temperature values for Screen Lighting effects now use 20 - 60 C as the default.
Version 4.16.187 Patch Notes
New product support
- The following legacy coolers are now supported in iCUE:
- H110i
- H110i GT
- Voicemod support is now available. You can assign any number of exclusive Voicemod assignments to your keyboard keys under Key Assignments in iCUE after installing the latest version of Voicemod on your system.
- iCUE is now fully compatible with Windows 11.
Software enhancements
- Added a tutorial to iCUE Dashboard for helping new users with setup.
- Updated iCUE toast and modal notifications with a new interface.
- Updated CPUID SDK; a future update will add support for Intel's new generation of CPUs.
- Improved the appearances of all device images.
- Resized the info button for the Storage Drive widget to fix the alignment.
- Fixed the Don't Show Again option for notifications to prevent the respective pop-up from appearing if toggled.
- Resolved an issue where profile reordering through drag and drop was not working properly.
- Fixed an issue where deleting a profile containing a very long name was not working properly.
- Updated iCUE to ensure you do not lose your profile settings when updating to a newer version of iCUE.
HID product enhancements
- Resolved an issue where the HARPOON RGB PRO's device image was not properly showing the lighting zone for the DPI indicator.
- Legacy RGB keyboards (e.g. K70 RGB, K65 RGB, K95 RGB, etc.) can now save a single Static Lighting Effect to the keyboard.
- Key assignments no longer save with a blank name, and will instead use the last default name.
- Set the default gesture for M65 ULTRA/Wireless to 20 for the left tilt for consistency.
- The Disable Key now works on the Forward and Back buttons for all SABRE RGB series mice.
- M65 ULTRA/Wireless no longer have DPI X and Y values unlinked.
- Fixed an issue where K70 RAPDIFIRE would reset Opacity to 100% when editing the Type Lighting effect.
- K60 PRO Series keyboards no longer have overflow for the Brightness slider.
- Resolved a rare issue where the K57 Wireless keyboard would report the wrong connection state when switching between wired and wireless settings.
- Fixed an issue where the Virtuoso XT's Bass Boost EQ setting causes issues with high bass audio.
- Resolved an issue where editing NEXUS widget sizes caused iCUE to crash from high memory usage.
DIY product enhancements
- Updated the lighting channel buttons so they no longer overlap with the fan rotation buttons when configuring setup for QL RGB fans.
- Devices with multiple sensors now properly feature a scrollbar in the dropdown menu.
- Fixed an issue where the OCP settings were not saving to the power supply.
- Resolved an issue where PSU sensor tiles were overlapping with the device image.
- Added an info message for Xeneon to inform you about certain options that may not be available when Windows HDR is toggled on.
Version 4.15.153 Patch Notes
New products supported
iCUE version 4.15.153 now supports the following legacy coolers:
- H100i V2
- H80i V2
- H115i
- H110i GTX
- H100i GTX
- H80i GT
Software enhancements
- Decreased the time it takes for device options to display when hovering over images on the home screen.
- Disabling a widget under Customize Dashboard will now hide all selected sensors.
- Game integration profiles have been updated to include the following game titles:
- Tribes of Midgard
- Chernobylite
- Vesper
- Starmancer
- Severed Steel
- Audio support for macOS is re-enabled for systems with M1 processors.
- Fixed an issue where iCUE would crash if a blank lighting layers was somehow created.
- The system taskbar now properly shows all profiles in iCUE for profile switching.
- Reduced the clickable area for button toggles to help you avoid unintentional clicks.
- Fixed some translation issues under the Integrations tab in Settings.
- Resolved an issue where text-overflow was appearing in the Assignments Library due to changing the language.
- For any list that allows for deletion, the Delete button has been moved to the bottom of the list to prevent accidental deletions.
- Info buttons now properly close a window when clicked again.
HID product enhancements
- When creating a new screen in iCUE Nexus, a default name will now appear.
- Fixed a rare issue where iCUE would crash when users tried to restore the original hardware profile.
- Improved the clickable area for button toggles.
- Added a pop-up window to remind users to save their hardware lighting and assignments prior to leaving the tab.
- Resolved an issue where key repeats could occur while in the lock screen for Windows.
- Devices with Battery Status no longer show on the system taskbar when the option is toggled off.
- Devices in Multipoint mode no longer show 2000Hz as a polling rate, as it was never intended as a selectable option.
- The K65 Mini now properly works when combining FN + International 1 Key on Japanese layouts.
- The Watercolor Spectrum lighting effect now properly plays on the VOID ELITE WIRELESS/USB headsets.
DIY Product enhancements
- Metro and Subnautica GameSDK profiles now properly light up the Hydro Series Platinum and PRO XT coolers when no fans are configured for lighting.
- Fixed an issue where rapidly switching between profiles with Video Lighting as a lighting effect rarely caused iCUE to crash.
- Fan Speed and Pump Speed tiles no longer overlap each other for devices that use them.
Version 4.14.179 Patch Notes
Software enhancements
- Due to Nvidia API changes, we have temporarily disabled fan control for all supported 30XX Founder Edition's cards. We will reenable this in a future update.
- Resolved an issue where iCUE would crash when importing Nexus screens created in an older software version of iCUE.
- Device tiles on the Home Screen will automatically expand in size if you only have 1 or 2 devices connected.
- Added a setup tutorial for the Dashboard.
- Added a new lighting effect for all RGB devices called "Watercolor Spectrum."
- Updated OpenSSL Library to v1.1.1k.
- If you update iCUE from version 3.38, you will no longer encounter an error preventing you from completing the installation to iCUE version 4.14 or newer.
- Fixed an issue where the iCUE window would not close properly if you opened it from the system taskbar.
- iCUE will no longer prompt you with two messages to restart after completing installation.
- When expanding profiles, all user interface elements will be properly hidden from Sensors and Scenes.
- Default sensors for the Home Screen no longer show widgets for every core on the CPU.
- Updated the link for Dolby Atmos in notifications to https://www.corsair.com/dolby-atmos.
HID product enhancements
- K65 Mini images have been improved for UK and KR layouts.
- iCUE Nexus widgets can now be renamed while configuring the element.
- The background colors for iCUE Nexus widgets will now be properly display if toggled on.
- Resolved an issue where Hardware Profiles will, in a rare situation, would not properly save for Hardware Playback-supported keyboards.
- LS100 Video Lighting now properly displays the name reported by the monitor.
- Fixed an issue where, in a rare situation, Multipoint-enabled devices would not work properly when coming out of the lock screen.
- The K70 TKL no longer crashes iCUE if the Pro Switch is enabled after configuring the Tournament Mode Backlighting Color in Device Settings.
- The K70 TKL will now properly disable Alt + F4 if this option is enabled in the Performance tab.
- KATAR PRO Wireless's sleep timer no longer constantly defaults to 10 seconds.
- K57 Wireless text has been improved for Spanish, Portuguese, and Japanese languages to prevent text overflow in the user interface.
DIY product enhancements
- Added additional widgets for HXi, AXi, and RMi power supply units that were previously found in CORSAIR LINK.
- When editing the Custom Curve for all cooling products, the current value for the selected sensor will now appear.
- DRAM Device Images in iCUE have been updated for DIMM Setup and Lighting tabs.
- Resolved an issue where CORSAIR ONE systems would lose LED lighting assignments when adding a new layer.
Version 4.13.223 Patch Notes
New product support
The following products are now supported in iCUE:
- iCUE H170i ELITE CAPELLIX Liquid CPU Cooler
- VIRTUOSO RGB WIRELESS XT T-PAIN Edition High-Fidelity Gaming Headset
Software enhancements
- The Home Screen now features the following CPU widgets by default:
- CPU Package Temp
- CPU Load
- GPU Temp
- Motherboard VCPU
- Pump Speed for Hydro Series Coolers (if available)
- Pump Temp for Corsair Cooler (if available)
- Improved the user interface by showing the selected profile marked for deletion
- Added a link to the official Corsair Discord channel; you can find this by clicking the Corsair logo in iCUE
- Resolved an issue where the info window would mistakenly appear after in iCUE after your system wakes up from Sleep Mode
- Fixed an issue where certain firmware update messages were not properly translated for all languages
- Resolved an issue where icons on the Home Screen device tiles were not aligning with the device name
- Icons no longer overlap with the device image for certain devices
- Info windows no longer overlap the Lighting Effects windows when restoring iCUE from a minimized state
- The Color Picker no longer appears when adjusting the color anchors for custom lighting effects
- Profiles will now highlight properly when you hover your mouse cursor over them
- Popups will close when you click outside of them
- Fixed an issue where warning messages were not properly closing when you click the X button
- Resolved an issue where warning messages were overlapping with one another after changing languages
- ASUS STRIX GPUs with multiple LEDs are now supported
- Fixed an issue with the Device not detected on LAN error for Phillips Hue
- Resolved an issue where toggling a lighting layer in ASUS MB Lighting only affected a single lighting zone
- SDK Support can now be found under the Integrations tab in Settings
- Users can now block specification applications from using iCUE's SDK lighting
- Specific devices can be toggled on or off from exclusive SDK control
DIY product enhancements
- Commander Pro, Lighting Node Pro, and Lighting Node Core will now always have six fans selected by default in the Lighting Setup tab
- Hydro Series PRO XT Coolers now feature a variable pump speed setting that will increase or decrease based on the CPU load
- Fixed an error where notifications incorrectly asked for a thermal probe connection even when Hydro X is not selected as a device
- Resolved an issue where the Commander Core was not able to detect fans properly
- Fixed an issue where the LT100's Video Lighting effect was not working properly when portrait mode was selected for the assigned monitor
- Resolved an issue for Hydro X where Preset Curves did not save on iCUE restart
HID product enhancements
- New Screen creation for iCUE Nexus now features a black background isntead of white
- Improved how Lighting Effect - Blink is shown for all headsets
- The K55 PRO Type Lighting - Wave now properly plays a ripple on both sides of the key pressed
- Fixed an issue where the K95 RGB PLATINUM XT incorrectly displayed the wrong window when you make a change in Device Settings
- The HS45 Surround no longer places voice prompts when plugging in a microphone
- Improved the interaction of text boxes when configuring the Nexus
- Updated the URL for Dolby Atmos support to a dedicated landing page
- On-the-Fly DPI Adjustments toggles no longer require two clicks to change the toggle
- Resolved an issue where DPI modes of mice no longer move by holding and dragging at the dashboard
- The K57 RGB Wireless no longer has overflowing text in the Performance tab due to iCUE language changes
- The K70 RGB TKL's Lock & Profile indicators no longer turn off when you adjust the keyboard's brightness
- Fixed an issue for the KATAR PRO where Disable could not be applied to the Forward and Back buttons
- Improved the Virtuoso XT and Virtuoso XT T-Pain's Bass Boost EQ setting
- Resolved an issue where MM700 RGB lighting zones were improperly lighting up even after being disabled
- Hover states now implemented for all Key Assignments
Known issues
- We are still working with MSI to identify the root cause of why certain motherboards are not showing up properly in iCUE
- We are working with the Phillips Hue team to find the root cause of why Phillips Hue lighting playback experiences stoppage with some of our dynamic effects
- The KATAR PRO Wireless may not be detected in iCUE upon waking your system from Sleep Mode; we are looking into this issue and ask that you replug your USB wireless receiver as a temporary fix for this issue
- Capellix coolers may not save any hardware settings if your system enters Sleep Mode on certain TRX40 systems; one workaround is to quite iCUE in order to save your settings
- Due to changes in the NVIDIA GeForce driver, fan support is temporarily disabled; we are actively working on an update to resolve this
Version 4.12.214 Patch Notes
Software updates
- The installer will now feature the latest product videos from our YouTube channel.
- Our Discord channel can now be accessed via iCUE by clicking on the Corsair logo on the upper left corner and clicking Discord.
- Phillips Hue now supports quick lighting zones based on "Rooms."
- Profile - Import will now only import lighting data by default to prevent you accidentally getting unwanted profile data such as DPI and custom fan curves.
- Plug-in errors on startup will no longer crash iCUE.
- Fixed an issue where update percentage was not appearing properly during the firmware update process for all devices.
- Resolved an issue with the color editor having all R/G/B values off by 1.
- Sleep Mode for supported devices is now properly translated for all supported languages.
- Fixed an issue where the Dashboard was not displaying certain sensors individually.
- You can now properly rename sensor names that were imported from iCUE version 3.
- iCUE 4 no longer shows inaccurate notifications when exiting Sleep Mode.
- You can now properly change profiles from the taskbar without having to bring iCUE to the foreground.
HID product enhancements
- The Profile Conflict notification has been updated for better clarity and understanding.
- Fixed Button Press Optimization so that it only works when the option is enabled.
- Font selection for the Clock widget now matches the font selection for button customization.
- Resolved an issue where Remap - Application Key was not triggering properly.
- The M65 RGB ELITE and DARK CORE PRO/SE now have Button Press Optimization available in their Device Settings.
- Fixed an issue where the Virtuoso/SE headset was able to update to Multipoint without other Multipoint devices.
- Tracking jogging mode for Spotify will now work properly on macOS if enabled once your K100 RGB keyboard has been updated to the latest available firmware.
DIY product enhancements
- Hydro X XD7 is now supported for all iCUE controllers.
- Temp has been changed to Coolant Temp for Hydro Series Cooler widgets.
- Resolved an issue where Hydro Series coolers would repeatedly update firmware even after the firmware has been updated.
- Removed Quick Lighting Zones for H150i PRO coolers since those coolers only have one RGB zone.
- Fixed an issue where the Infinity Lighting effect was not displaying properly on 8-LED type fans
Known issues
- We are working with MSI to identify the root cause of certain motherboards not showing up properly in iCUE.
- ASUS 3000 Series GPUs with multiple LEDs will not appear correctly in iCUE, but we will have this fixed in the next iCUE update.
- Phillips Hue lighting playback may experience stoppage with some of our dynamic effects; we are working with the Hue team to fix this problem.
- Katar PRO wireless mice may not be detected in iCUE when waking from Sleep Mode; while we work on fixing this issue, you can replug the USB wireless receiver to temporarily fix this issue.
Version 4.11.240 Patch Notes
Software updates
- Added a global library for lighting effects; devices that share the same type of lighting effects will now see those lighting effects in the library).
- Nvidia RTX 3070 FE and 3060 FE are now supported in iCUE with fan control.
- Profiles now support linking to multiple applications; the option to link to multiple applications will be seen after you link to your first application.
- iCUE will now automatically update all GameSDK profiles for supported integrated titles upon startup.
- Improved the Video Lighting effect to ignore black areas of the screen.
- Improved the scaling of certain device images by decreasing the overall size.
- Fixed an issue where iCUE would crash when using it together with a Windows Mixed Reality headset.
- Changed hardware saving of devices so that saves occur 2 seconds after a change in any Hardware Lighting or Cooling tabs; this applies to both HID and DIY products.
- Fixed an issue where iCUE would crash after waking from sleep or hibernation.
- Resolved an issue where iCUE would crash when a user selects a file or folder while customizing a key assignment.
- Fixed an issue where iCUE had issues starting if it was being updated from an older version of iCUE.
- Resolved an issue where the Windows Restart Prompt sometimes appeared before iCUE finishes installing.
- Fixed an issue where iCUE did not stay maximized after restoring the window from the taskbar.
- Resolved an issue where the Profile Icon selector would overlap the edit window.
- Profiles will no longer be created until the Create button is clicked during profile creation.
- Fixed an issue where tutorial tooltips could not be closed if the screen was minimized while the tooltip was still on the screen.
- Resolved an issue where the Brightness bar was not appearing correctly if switching between Device Settings and the home screen.
- Fixed an issue where the clickable area for toggles was bigger than the toggle itself.
- Resolved a localization issue where certain texts in iCUE were not properly translated.
- Added a warning window that appears before performing a firmware update; this is to warn users that certain programs (e.g. Gigabyte Fusion) may interfere with the update process if they are running in the background.
- ASUS Plugin: Fixed an issue where lighting layers showed up incorrectly after creating a new profile.
- MSI Plugin: Resolved an issue where re-ordering RGB fans was not working properly.
- Phillips Hue Plugin: Removed Quick Lighting Zone since the plugin does not support it.
- Phillips Hue Plugin: Fixed an issue with the bridge connecting to iCUE.
- macOS: Resolved an issue where multipoint devices showed a malfunction icon when returning from the lock screen.
HID product updates
- Disclaimers have been added to all devices with polling options higher than 1000Hz.
- Added Button Response Optimization for all KATAR series computer mice.
- Fixed an issue where wireless headsets were unable to display battery status while charging.
- Resolved an issue where the Default icon did not appear correctly in the DPI widget for the Dashboard.
- Fixed an issue where DPI tabs would overlap other graphics when iCUE was minimized and restored.
- K100: Resolved an issue where the control wheel still functioned even when disabled.
- K55 PRO XT: Fixed an issue where the Wave and Ripple lighting effects were not playing across the entire keyboard.
- K55 PRO XT: Resolved an issue where key selection was not displayed properly on the device image.
- K65 MINI: Fixed an issue where the warning for overwriting default shortcuts did not appear when using the virtual keyboard to assign a key.
- STRAFE MK.2: Resolved an issue where the Brightness key was disabled even if the Lock Button was off.
- KATAR PRO: Fixed the DPI label from X/Y to DPI since the KATAR PRO does not support individual X/Y axis customization.
- VOID ELITE: Resolved an issue where names for custom EQ layers would extend out of the window.
- HS70 PRO: Fixed an issue where EQ presets were not working properly on the iCUE home screen.
- MM800: Resolved an issue where Quick Lighting Zones not having the selected lighting effects play over the selected LEDs.
- K100 and K70 TKL: Added custom key groups when assigning predefined lighting effects.
- NEXUS: Fixed an issue with selecting a program with Launch Application.
DIY product updates
- Resolved an issue where some devices have a blank alert as a default option.
- PRO Hydro Series Coolers: Fixed an issue where affected Hardware Lighting effects would not display alternating color options.
- Capellix Hydro Series Coolers: Resolved an issue where Device Settings would erroneously show the device as a Lighting Node.
- CORSAIR ONE: Improved the Meter Lighting effect when transitioning between the min/max values.
Known issues
We are aware of the following issues and are working to fix them as soon as possible:
- When updating firmware, the percentage indicator may not appear correctly.
- Some MSI motherboards may not be detected properly despite showing up in earlier iCUE versions.
- ASUS 3000 Series GPUs with multiple LEDs will not display properly.
- Phillips Hue lighting playback may experience stoppage with some of our dynamic effects.
Version 4.10.273 Patch Notes
- Multipoint is now supported by all compatible Slipstream devices; a wizard has been implemented in the Connections tab for your respective Slipstream USB receiver.
- To start the process, you need a combination of compatible Slipstream keyboard, mouse, and/or headset. A firmware update is needed for all devices to support Multipoint pairing.
- Fixed an issue related to the firmware update for the HS75 XB headset.
- Added tutorials for the K65 Mini keyboard.
- Added weight tuning feature for the Nightsword mouse.
- Added the Add Screen enhancement to the setup wizard for RGB fans.
- Added an enhancement for iCUE Nexus that loops pages for the start / end screens.
- Added blue color to the custom palette of the CORSAIR One.
- Changed the scaling of the opacity slider.
- Changed Set to Default for DPI presets to Activate for clearer consistency.
- Updated 8K polling message for the SABRE PRO mouse.
- Fixed an issue where iCUE would crash when Skip is used during a message to re-plug a device.
- Fixed an issue where iCUE would crash in sleep or hibernation.
- Resolved an issue where the installer would delay before launching successfully.
- Resolved an issue where the GUI would take a few seconds to disappear after the Reset button for Restore to Normal Operations has been pressed.
- Fixed an issue where renaming a lighting effect while "hidden" disabled the effect entirely.
- Fixed an issue where the color picker wheel and the Solid lighting effect did not appear properly.
- Fixed an issue where the home screen sensor widgets did not update to show changed temperature units until after restarting iCUE.
- Resolved an issue with the Add Widgets window on the home screen where the scroll bar would keep adjusting and popping the page up.
- Resolved an issue where enabling Dashboard Products by Toggle caused all items to be selected.
- Fixed an issue where sensors automatically activated when the On button in the Dashboard tab is clicked.
- Fixed an issue where pressing the FN + F4 keys caused the Title bar to appear.
- Fixed an issue where the Settings tab would not close when its icon is selected.
- Resolved an issue where the background was not darkening properly when Pop-Up is open.
- Resolved an issue that was preventing users from deselecting the Remap: Keystroke field.
- Fixed an issue where sensors on the home screen would all populate on the left column instead of filling in both columns.
- Fixed an issue where the scroll wheel was not interacting with the home screen scroll bar.
- Resolved an issue where the system profile search engine was not working automatically.
- Added a button to Text Editor and File Explorer of Launch App Action.
- Fixed an issue where unchecking "executive uninterrupted" in MACRO does not work properly after restarting the system.
- Corrected a typo with surface calibration.
- Corrected an issue with spelling in language selection.
- Fixed an issue where the information in Import Profiles was not localized.
- Fixed an issue where the information in Export Profiles was not localized.
- Resolved an issue where the Nexus's brightness did not sync when iCUE is booted.
- Resolved an issue where the Nexus did not show new temperature units after said units are changed in iCUE.
- Fixed an issue where the Nexus was missing the Mic Mute/Unmute function for the VOID Surround series headsets.
- Fixed an issue where Slipstream-compatible mice were not able to wirelessly pair via the Connections tab.
- Resolved an issue where the K100 keyboard where Control Wheel: Info was overlapped when users completed the last instruction.
- Resolved an issue where users could incorrectly select specific keys for predefined effects on the K100 keyboard.
- Fixed an issue for the SABRE PRO mice where the name was too long to allow for button selection.
- Fixed an issue for the K65 MINI keyboard where the menu did not work when swapping menu key function.
- Fixed an issue for the VOID PRO USB headset where the beat effect showed the wrong color.
- Resolved an issue where the DRAM lighting effect "Water" had the Ripple and Base colors affect the opposite element.
- Resolved an issue where the Hydro X lighting did not work when multiple reservoirs were configured.
- MSI JCORSAIR Port will now match and share lighting data in profiles with the Lighting Node PRO.
- Fixed an issue where the K65 MINI keyboard's FN shortcut list was not translated.
- Resolved other minor bugs and issues.