VENGEANCE System: What to do if you do not get a display from your VENGEANCE PC

If you have purchased and set up a new VENGEANCE PC but are not getting a display from it, the issue may be caused by the ports you are using being disabled.

When a graphics card is added to the system, the integrated graphics may be automatically disabled. This may give the impression that something in the system is not working right, but things are actually working as intended.

Instead of using the ports on the motherboard, try using the DP/HDMI ports on the GPU instead. The ports may be covered by a protective port cover; remove those and plug your monitor into the ports.

How to fix the issue

Follow these steps if you are not getting a display from your VENGEANCE PC:

1. Make sure your system is completely powered down.
2. Look for the DP/HDMI ports on the system GPU; we have highlighted the proper ports in the example images below in green, while the ports highlighted in red may be disabled and should be avoided if you plan on connecting your monitors to the ports on the GPU.
   • Here are the ports on a VENGEANCE system that uses a 4000D Airflow case; the GPU ports are on the bottom:
     
     
     
   • Here are the ports on a VENGEANCE system that uses a 480X case; the GPU ports are on the bottom:
     
     
     
3. Remove any plastic covers that are on the DP/HDMI ports on the GPU.
4. Plug your monitor into the leftmost ports if using only one or two displays.
5. See if you have an image on your monitor(s).

If you are still experiencing issues or have further questions, contact Customer Support and we will provide further assistance.