MP600 MINI: QUICK START GUIDE
Before you begin, please make sure to discharge any electrostatic charges to prevent damage.
-
Power down your system: Shut down your computer completely.
-
Locate an available M.2 key M 2230 slot: Consult your motherboard or system documentation to find the appropriate slot on your system.
-
Prepare the M.2 slot: Remove any covers and screws that may be covering the M.2 slot.
-
Install the M.2 drive: Carefully insert the M.2 drive into the slot and secure it with a screw. Ensure that the stand off is mounted in the 2230 position. Avoid over-tightening the screw to prevent damage to the drive. Note that some systems may use clasps instead of screws for securing the drive, so please refer to your motherboard or system documentation for specific instructions.
-
Replace the slot cover: Once the M.2 drive is securely installed, put back any cover that was removed from the slot.
By following these steps, you can successfully install an M.2 drive in your system. If you have any further questions or encounter any issues, please consult your motherboard or system documentation or reach out to our support team for assistance.